The Impact of Communication in Business and Life - 10 Tips for More Effective Communication in BusinessMar 04, 2019
As stated in many articles we spend 80% of our waking hours in some form of communication. That is a lot of time and leaves much room for misunderstandings, and assumptions. What people perceive becomes fact for them. Their past and life has taught them to think and listen in a certain way. Now we can’t be expected to understand and know what everyone’s past or life experience have been. What we can do is improve our way of communicating with others so our information lands in a way that could be heard and understood in the way it is being presented.
There is always room for improvement in anything we do and communicating is definitely one of those areas we need to continuously work on, especially because we spend 80% of our time doing it.
I found the article below by Calvin Sun to be very helpful and informative. It is in alignment with what I teach my clients and how I practice my communication.
Enjoy the article and if there is anything, we can do to support you in your business please connect with us.
International Executive Coach, Speaker, Trainer
10 Ways To Communicate More Effectively With Customers And Co-Workers
We all know what happened to the Titanic. Clearer communications could have prevented the tragedy and the loss of more than 1,500 lives. Communications plays just as important a role in your careers. When asked to name the top three skills they believed their subordinates need, 70 percent of the readers of CIO magazine listed communications as one of them.
Here are some tips on how you can communicate more effectively with people at work, be they customers, co-workers, subordinates, or superiors.
1: Beware of interrupting
Titanic wireless operator Jack Phillips interrupted a wireless message from a nearby ship, telling them to shut up. In doing so, he prevented that ship from sending Titanic an iceberg warning.
Be careful about interrupting others, particularly your customers. They'll be especially upset if, while they're explaining a problem, you interrupt them and start offering a solution. If you feel you have to interrupt, at least cut to the chase and tell the other person what you think his or her main idea was. That way, the other person at least can confirm or correct you, and in either case save time.
2: Listen actively
Did you ever get the feeling, when talking to someone, that you were really talking to a wall? The person may have heard you but gave no indication of it at all. Avoid doing the same thing. When communicating with others, it's just as important that people be aware that you're listening as it is that you're actually listening. For that reason, be involved with and react to what the other person is saying, either via a nod, or an "I see," or a paraphrase of the other person's statements. You'll strengthen your own understanding and make a better impression.
3: Avoid negative questions
Suppose you say to a customer, "You don't have Word installed?" and he answers "Yes." What does he mean? Yes, you're right, Word is not installed? Or yes, he DOES have Word installed?
Asking a negative question creates confusion. It's clearer if you phrase the question positively (e.g., "Do you have Word installed?") or ask an open-ended question ("What applications do you have installed?"). If you must use the negative, try a question such as "Am I correct that you don't have Word installed?"
4: Be sensitive to differences in technical knowledge
Chances are, your customers have less technical knowledge than you do. Be careful, therefore, when explaining things to them. If you use acronyms, be sure you identify what the acronym means. The same acronym can mean different things, even in an IT context (for example, ASP can refer to "application service provider" or "active server page"). Be careful that you don't make two opposite mistakes: either talking over their head or talking down to them. Keep your eyes on customers when you talk to them and be alert to cues indicating that they don't understand. Ask them whether they understand what you're saying, if necessary.
5: Use analogies to explain technical concepts
A good way to explain a technical idea is to use an analogy. Though they have limitations, analogies are helpful in explaining an unfamiliar idea in terms of a familiar one. One of the best analogies I ever heard compared a firewall to a bank teller. When you enter a bank, you don't just go into the vault and get your money. Instead, you go to a window, where the teller verifies your identity and determines that you have enough money. The teller goes to the vault, brings it back to the window, gives it to you, and then you leave.
6: Use positive instead of negative statements
Your customers are more interested in your capabilities than in your limitations. In other words, they're interested in what you can do, rather than what you can't do. The way you say things to them influences how they perceive you and your department. You, as an IT department or individual, can be seen as a roadblock or you can be seen as a partner. So, for example, instead of saying, "I can't help you unless you log off," consider saying, "Please log off so that I can help you." Your statements often will be easier to understand as well.
Here's another reason to avoid negative statements. Have you ever experienced gaps of silence in your telephone calls, where the conversation breaks up? Usually it happens when using a cell or a VoIP telephone. If the gap occurs as you're saying "not," your recipient could get the opposite message from what you intended.
7: Be careful of misinterpreted words and phrases
Sometimes we say something with innocent intent, but the other person misinterprets it. We mean to say one thing, but our pronunciation or inflection causes us to convey something else. For example, in Chinese, the sound "ma" said in a high level tone means "mother in law." However, said in a falling and rising tone, it means "horse."
Be especially careful of the word "you." Overusing this word can make the person you're talking to feel defensive or threatened. Instead of saying, "You need to speak louder," try saying, "I'm having trouble hearing." Another issue involves the dual meaning of "you." Unlike other languages, English uses the same word to refer to an actual person (for example, the person you're talking to) as well as to a hypothetical person. Suppose you said to someone, "You never know what's going to happen next," and meant to equate "you" with "people in general." The other person might think you're referring to him or her specifically and take offense. A better alternative might be, "It's really unpredictable here."
If someone is upset, one of the worst things to say is "calm down." It might work one half of one percent of the time, but generally all it does is make things worse.
In general, think before you speak. I'm not saying you always have to be polite or diplomatic. Sometimes you do need to (figuratively, of course) beat people up. However, do consider the alternatives before speaking. As the proverb goes, "He who guards his mouth and his tongue keeps himself from calamity."
8: Remember that technical problems involve emotional reactions
When customers have a technical problem (for example, they're having trouble printing), keep in mind that they'll almost always have an emotional reaction as well. Those emotions can range from simple annoyance to outright panic, depending on the importance of the document and the time element involved. I'm not saying you have to be Dr. Phil, but it's important to acknowledge and recognize these emotional reactions. If all you do is solve the technical problem and walk away, chances are the customer will still be upset.
In these cases, simply saying something like, "Pain in the neck, isn't it?" or "I hate when that happens to me" can help the customer feel better about the situation and possibly feel more positive about you.
9: Anticipate customer objections and questions
In his book The Art of War, the ancient Chinese author and strategist Sun Tzu said, "If you know the enemy and you know yourself, you need not fear the result of a hundred battles." Apply this principle when communicating with customers. In particular, try to anticipate the objections your customers will have to your message and address those objections.
For example, suppose you're sending out a directive regarding the downloading and application of Windows updates. Suppose further that you have customers who know enough to be dangerous. Such a customer might think, "Well, I'm current in my virus definitions, so this update is unnecessary for me." Your communications with such a customer will be more effective if you anticipate and address that issue. Consider, therefore, a sentence such as, "This Windows update is necessary even if your virus definitions are current."
10: Keep the customer informed
The area where I live, southeastern Pennsylvania, has a large agricultural presence, in particular involving the production of mushrooms. While they are growing, mushrooms are kept in a dark building and are covered with fertilizer.
Your customers will become upset if you treat them the same way. Keep them informed of developments involving them, particularly with regard to technical problems and outages. In particular, keep them apprised even if nothing is going on. For example, let them know you've contacted the vendor but still haven't heard anything back. No news is still news.
If a customer leaves you a request via voicemail or e-mail, let the customer know you received it, even if you are still in the process of handling it. Doing so gives the customer one less matter to worry about.
When a problem is resolved, let the customer know that, too. Nothing is more frustrating to customers than finding out that they could have been working sooner if they had only known.
GET THE LEADERSHIP QUALITIES CHECKLIST
What qualities do you possess? Great leadership comes from having a great mindset and believing in who you are and what you are doing. Download Your Free Checklist.
We hate SPAM. We will never sell your information, for any reason.